The majority of the plate marking machines supplied by MAGNEMAG combine different marking technologies such as paint/punch, paint/edge, punch/edge or paint/punch/edge.
The paint marking system used is based on our 
classic or Combi-Jet technology, whereas our punch technology is the basis in our punch marking machines. MAGNEMAG supplied more than 250 plate marking machines worldwide over the years.
Some typical combined plate marking applications are illustrated:
- Marking of plates anywhere in finishing lines (pictures 1 to 8)
- Combined paint and punch markings - lengthwise markings (pictures 1 to 3)
- Combined paint and punch markings - crosswise paint markings (picture 5)
- Combined paint, punch and edge markings (pictures 3, 4, 6, 7 and 8)
- Complex combined paint and punch markings with multiple marking heads (picture 8)
Image Gallery:
 |
Picture 1
Cantilever type machine (at roller conveyor)
Cantilever type machine (at roller conveyor)
 |
Picture 2
Cantilever type machine (at cross transfer conveyor)
Cantilever type machine (at cross transfer conveyor)
 |
Picture 3
Cantilever type machine (at roller conveyor)
Cantilever type machine (at roller conveyor)
 |
Picture 4
Cantilever type machine (at cross transfer conveyor)
Cantilever type machine (at cross transfer conveyor)
 |
Picture 5
Bridge type machine (at roller conveyor)
Bridge type machine (at roller conveyor)
 |
Picture 6
Bridge type machine (at roller conveyor)
Bridge type machine (at roller conveyor)
 |
Picture 7
Bridge type machine (at roller conveyor)
Bridge type machine (at roller conveyor)
 |
Picture 8
Bridge type machine (at roller conveyor)
Bridge type machine (at roller conveyor)
References
 |
 |
 |
 |